Electrical Components for Dollhouses
317-414-3921
All Products
Displaying 13 to 24 (of 230 products)
12 volt/8 x 1 AA Battery Holder w/leads
Size: 5 x 2-3/4 x 3/4 inches Plastic battery Box. Holds eight AA batteries giving an output of 12 volts. An excellent...
$9.98
... more info
12 volt; 4 x 2 AA Battery Holder Box
Size: 2.5 x 2.5 x 1.125 inches Plastic battery Box. Holds eight AA batteries giving an output of 12 volts. An excellent power...
$5.95
... more info
12-volt probe tester
A new and improved 12-volt tester is now made in-house and the two pin probes have been spaced further apart to line up with the center of each...
$5.99
... more info
12-volt tester plus
This 12-volt probe tester does more than the 721-1 testers. The 721-1 has an indicator light that turns on when the sharp probes are pushed...
$12.75
... more info
1206 (Chip) LED with Leads
This chip LED is one of the larger flat surface mount type of LED's. The 5050 size is what is on most reels of LED's but some...
$3.00
... more info
16,000 hr. 30 ma., .03 CP, Bi-Pin bulb, 10/pk
These new bulbs are rated at 16,000 hours of use. Over three times longer than what has been available in the past. These incandescent,...
$15.60
... more info
16,000 hr. 50 ma., .07 CP, Bi-Pin bulb, 10/pk
These new bulbs are rated at 16,000 hours of use. Over three times longer than what has been available in the past. These incandescent,...
$15.60
... more info
2 amp DC power supply/24 watt
12 volts, DC, 24-watt, voltage regulated and circuit protected power supply Able to handle 1 to 52, 40mA lights Good for most dollhouses. CR2S...
$30.00
... more info
2 amp on/off switch (5 pk)
SMT Button on/off switch. This switch is rated at 2 amps @ 12 volts DC. Only slightly larger than 908, this switch is easily soldered onto one...
$5.00
... more info
2-AA battery box
Empty battery box made for 2-AA batteries. Box has an on/off slide switch and 2- 6-inch wire leads. Same dimensions as the 9-volt...
$3.95
... more info
Displaying 13 to 24 (of 230 products)
