All Products

The smallest made LED.  Has 6 inch mag wire leads soldered to the chip.  Works on 3 volts DC only as is.  Made to use with 3 volt...

This is an extremely small chip LED only .04 x .06 inches in size.  The same LED chip used in our Christmas light strings and the...

12 volts, DC, 12-watt, 1 amp voltage regulated and circuit protected power supply Able to handle 1 to 26, 40ma lights Good for single room box or...

This cord is an extremely easy way to run two displays from one power supply.  It simply splits the output plug of the power supply into two...

A cord designed to power three different displays from one power supply.  It simply splits the output plug of the power supply into three...

This new log 'n flame is totally made in house and works and looks better than any past unit.  The new circuit draws only 7 ma. of...

Heat-shrink tubing.  50 sets of black and red 1/16-inch tube (.1.5mm).  Slide tube over junction of two wrapped wires.  Apply heat...

1/8-inch ribbon x 5-meter reel (16 ft. -- 4.85 inches) with 6 inch 32 Awg Kynar wire leads attached.  Pure White LEDs spaced at approximately...

1/8 inch ribbon x 5 meter (16 ft. -- 4.85 inches) reel with 6 inch 32 Awg Kynar wire leads attached.  Warm White LEDs spaced at approximately...

screw-base incandescent peabulb.  Four count in package.

A great little add-on for any dollhouse Every Dollhouse Needs a Doorbell!      The circuit board is designed to play 3 different...

Key Features of the 12-channel remote pre-wired for the use with any dollhouse or diorama.  Each button controls a separate relay to...