All Products

New and improved 12-volt tester is now made in-house and the two pin probes have been spaced further apart to line up with the center of each copper...

Size:  5 x 2-3/4 x 3/4 inches Plastic battery Box.  Holds eight AA batteries giving an output of 12 volts.  An excellent...

Size: 2.5 x 2.5 x 1.125 inches Plastic battery Box.  Holds eight AA batteries giving an output of 12 volts.  An excellent power...

This chip LED is one of the larger flat surface mount type of LED's.  The 5050 size is what is on most reels of LED's but some...

These new bulbs are rated at 16,000 hours of use.  Over three times longer than what has been available in the past.  These incandescent,...

These new bulbs are rated at 16,000 hours of use.  Over three times longer than what has been available in the past.  These incandescent,...

12 volts, DC, 24-watt, voltage regulated and circuit protected power supply Able to handle 1 to 52, 40mA lights Good for most dollhouses. CR2S...

SMT Button on/off switch. This switch is rated at 2 amps @ 12 volts DC.  Only slightly larger than 908, this switch is easily soldered onto one...

Empty battery box made for 2-AA batteries.  Box has an on/off slide switch and 2- 6-inch wire leads.  Same dimensions as the 9-volt...

This is a threaded screw base, .4 inch candle with a 2.0 flame bulb.  Replacement bulb for sconches and chandelier lights.  Four bulbs in...

Pre-wired with12 inch wire leads, this 2.0mm flame-tip incandescent bulb is perfect for DYI projects or to replace older lamps bulbs that do not have...

Complementary lighting to Incandescent lights      These LED light bars work very well to illuminate the entire interior of...