All Products

1/8 inch ribbon precut at 2" pieces with 6 inch 32 Awg Kynar wire leads attached.  Four, two inch pieces per package.

1/8 inch ribbon precut at 4" pieces with 6 inch 32 Awg Kynar wire leads attached.  Four, four inch pieces per package.  Eight Wm...

1/8 inch ribbon precut at 6" pieces with 6 inch 32 Awg Kynar wire leads attached.  Two, six inch pieces per package.

I have made a few changes to what is included in the master tool kit.  I have found a couple additional tools that I use on a regular basis and...

The main component I use that allows me to connect the 12 volt output from the power supply to a 360 degree two conductor swivel is manufacture...

Micro Jacks make it possible to plug and unplug your light fixtures into the wiring system of your dollhouse.  Used in conjunction with...

Micro Jacks make it possible to plug and unplug your light fixtures into the wiring system of your dollhouse.  Used in conjunction with...

Micro JST 1.25 2-pin Male and Female connector plug with wire cables.  These connectors make a very good connection and are excellent if you...

A simple jack and connection block that replaces the Junction Splice.  I lightly sand the bottom of the junction splice and glue it in...

Cir-Kit's Plug is made to fit their 1/12" scale wall outlet.  The operation for attaching to the end of the wire from your lamp is...

The most true to scale of all outlets.  You will have to purchase and change the plug for each lamp that will be plugged into these...

In 2018 I received a grant from the Museum of Miniatures in Carmel, Indiana to rewire some 40 display boxes built by Vivian Barnes as well as a...