~Will Charge Even Fully Depleted Batteries
that cannot be safely charged with a normal charger
Charge One Individual LIR2450 Battery at a Time
LED Indicator Shows Charging Status
Automatically cuts off power when battery is fully charged
USB Power port for Use with any USB electronics you would like to use during charging or at any other time
2 New LIR2450 Batteries Included with Charger Purchase (CR2450 Rechargeable Battery Replacements)
LIR2032 Battery Charger
Worldwide Power : 110-220Volt AC input 50/60Hz
Charger Output: 4.2 Volt DC ~30mA (~1C Charge Rate)
USB Output: 5 Volt DC @ ~300 Milliamps
Charging time: 1-2 hours
Lightweight: 1.2 oz. (35 grams)
Instructions for Charging:
Connect charger to AC power
The Green Power light just above and to the Left of the USB port will be lit
Note: The Status Light to the Right will be off
Insert battery - Positive Side (+) Face Up
If the battery is not full the status light will light until the battery is fully charged.
Note: To insert the cell, please press down on battery until it clicks into place.
When Battery is Fully Charged
The Status Light will Turn Off
Note: To remove the cell, press the remove button by pulling the metal clip back. The Battery Should Pop Up and Out of the Charger.
If Battery loses power after charging and is still in the charger, the charger will automatically turn back on for a short time to recharge the battery back to full charge