Screwbase candlebase replacement bulb (6/pk)

Screwbase candlebase replacement bulb (6/pk)
click to enlarge

6 bulbs per package---50,000 hours.      Now you can replace your old screw base bulbs with a 50,000 hour LED.  I have made available replacement Led screw base bulbs for the three most common screw base bulbs in miniatures:  The Flame-tip; the Candle base; and the Pea bulb.  Each new LED bulb is specially made to illuminate a full 360 degrees looking very similar to the bulb it is replacing.  The high intensity bulb draws 30 ma of current while the other three draw only 5 ma.  These LEDs work only on 12 volts DC and thus have a polarity that has to be met.  The threaded sides of the base are the negative contact and the bottom tip is your positive contact.  For a new lamp being put into your dollhouse you can simply replace all of the incandescent bulbs with one of the new LEDs.  When you connect it to the dollhouse 12 volt DC circuit you may need to reverse the two leads in order for the light to work.  If the lamp has a plug, simply reverse the direction you are plugging it into the wall outlet and the lamp will work.  For light fixtures already hardwired into your dollhouse, you have a 50/50 chance that when you replace the bulb it will simply work.  If not, you might try flopping the two wires connected to the DC power source.

  • Model: 522
  • Shipping Weight: 0.0125lbs

Starting at: $12.00

Please Choose:

Bulb Type

Add to Cart: