Miscellaneous

A plastic molded hook I purchased to hang the red or black lantern from.  Check out MH1062, black lantern and MH1063, red latern under...

Replacement fuse for any of the different power connectors.  The fuse value should be equal to or less than that of the power supply.  In...

Heat-shrink tubing.  50 sets of black and red 3/32-inch tube (2.5mm).  Slide tube over junction of two wrapped wires.  Apply heat with...

Heat-shrink tubing.  50 sets of black and red 1/16-inch tube (.1.5mm).  Slide tube over junction of two wrapped wires.  Apply heat...

These glue sticks I use quite often to help with the application of glue.  Especially in assembling my ceiling fans but I also find them very...

SMT Button on/off switch. This switch is rated at 2 amps @ 12 volts DC.  Only slightly larger than 908, this switch is easily soldered onto one...

White snap on-off switch can easily be glued in place and is able to carry up to 1 amp of current.  An excellent switch for...

This is a small momentary push button that I include one with the purchase of a door bell. If additional buttons are needed this is the same small...

Very small momentary push button switch.  Possible choice for a 2nd and 3rd door button to go with the doorbell unit.  The button is...

Empty battery box made for the 9-volt battery.  Box has an on/off slide switch and 2- 6-inch wire leads    

Size: 2.5 x 2.5 x 1.125 inches Plastic battery Box.  Holds eight AA batteries giving an output of 12 volts.  An excellent power...

Size:  5 x 2-3/4 x 3/4 inches Plastic battery Box.  Holds eight AA batteries giving an output of 12 volts.  An excellent...